F-23 Brush Model

Crimped wire wheel for gang mounting

Ø Exterior (D)	Trim length (S)	Code							R.P.M..
		Coated steel				Stainless Steel		Brass
		0,15mm .006″ CD	0,20mm .008″ CE	0,30mm .012″ CG	0,40mm .016″ CI	0,20mm .008″ BE	0,30mm .012″ BG	0,30mm .012″ HG	Recom.	Max
mm / “	mm / “
100 / 4″	20 / 3/4″	231003CD	231003CE	231003CG	231003CI	231003BE	231003BG	231003HG	3.800	6.000
125 / 5″	32 / 1.1/4″	231203CD	231203CE	231203CG	231203CI	231203BE	231203BG	231203HG	3.000	6.000
150 / 6″	28 / 1.1/8″	231503CD	231503CE	231503CG	231503CI	231503BE	231503BG	231503HG	2.500	6.000
175 / 7″	40 / 1.1/2″	231703CD	231703CE	231703CG	231703CI	231703BE	231703BG	231703HG	2.200	6.000
200 / 8″	53 / 2.1/16″	232003CD	232003CE	232003CG	232003CI	232003BE	232003BG	232003HG	2.000	4.500
225 / 9″	50 / 2″	232203CD	232203CE	232203CG	232203CI	232203BE	232203BG	232203HG	1.800	3.600
250 / 10″	62 / 2.3/8″	232503CD	232503CE	232503CG	232503CI	232503BE	232503BG	232503HG	1.500	3.600

Tabla de ejes

Brush diameter	100 – 125 mm / 4″ – 5″	150 – 175 – 200 mm / 6″ – 7″ – 8″	225-250-300 / 9”-10”-12”
Fixed arbor hole	13 – 16 – 20 – 22 – 26 mm / 1/2″ – 5/8″ – 3/4″ – 7/8″ – 1″	13 – 16 – 20 – 22 – 26 – 30 – 36 -40 mm / 1/2″ – 5/8″ – 3/4″ – 7/8″ – 1″ – 1.3/16″ – 1.3/8″ – 1.1/2″	16-20-22-26-36-40-50 mm / 5/8″-3/4″-7/8″-1″-1.3/8″-1.1/2”- 2″

Applications and uses:

• Special brush to work in tight areas.
• Brushing of irregular surfaces where it is especially suitable because of its great flexibility.
• Can be used on its own or gang mounted on the same arbor to obtain the desired brushing width.
• Deburring the cut edges of pipes or profiles in manual and automatic systems.
• In steel, brass and stainless steel.