F-17 Wheel
Abrasive Nylon 6-12 Silicon Carbide
Technical Characteristics:
- The silicon carbide impregnated filaments are specially treated to work both on wet and dry surfaces.
- Brushing with nylon abrasive does not scratch or alter the dimensions of the parts
- The filaments flex and penetrate at all angles allowing parts with irregular shapes to be brushed.
- If some cooling systems allow speeds to be reached that are initially greater than those recommended, the speed indicated in the table must never be exceeded.
| Ø Exterior (D) | Rows | Width (A) |
Trim length (S) |
Multi-fitting mm / “ (E) |
Abrasive Nylon Medium Grain 180 NA |
RPM |  |
|
|---|---|---|---|---|---|---|---|---|
| mm / “ | mm / “ | mm / “ | CODE | Recom. | Máx. | |||
| 150 / 6” | 4 | 13 / 1/2” | 28 / 1.1/8” | 13-16-20-22-26-30-40-50 mm / 1/2”-5/8”-3/4”- 7/8”-1”-1.3/16”-1.1/2”-2” |
171504NA | 2800 | 6500 | 1 |
| 8 | 25 / 1” | 28 / 1.1/8” | 171508NA | |||||
| 175 / 7” | 4 | 16 / 5/8” | 40 / 1.5/8” | 171704NA | 2400 | 6500 | ||
| 8 | 28 / 1.1/8” | 40 / 1.5/8” | 171708NA | |||||
| 200 / 8” | 4 | 16 / 5/8” | 40 / 1.5/8” | 172004NA | 2100 | 4500 | ||
| 8 | 28 / 1.1/8” | 40 / 1.5/8” | 172008NA | |||||