Ask for more information

Wood finishing brushes

For fixed machines

Ø Exterior (D) Width (A) Arbor hole (E) Cable crimped
Abrasive Nylon
Grain 46
mm / “ mm / “ mm / “ CÓDIGO CÓDIGO Max.
150 / 6” 85 / 3.3/8” 50 / 2” 161528CEA50 171529NAU50 6000
120 / 4.3/4” 161541CEA50 171541NAU50

Applications and uses:

  • These brushes are used to remove the soft parts of timber, to make a wooden surface look old or for giving rustic effect. The brushes can be used in automatic machines (type Tupi) or portable ones which use wire brushes to remove the soft parts of timber and showing up the hard ones.
  • For choosing the right brush is necessary to take in mind whether the timber is of hardwood (oak) or of softwood (pine).
  • Brass coated steel wire brushes are used for roughing and abrasive nylon brushes to obtain the perfect finish.
  • As brush manufacturers we can attend to the most exceptional requirements. Our technical department advises you on the solution to your problems, jointly developing the brush design, with the aim of finding the most favourable and optimal solution.