F-18 Twist Knot Wheel

Knot of 12mm-1/2”

Applications and uses:

• Removal of welding and forging scale. Retreading.
• Recovery of bottles.
• Cleaning of joints in roads.
• Large removing capacity.
• Option to from rollers by gang mounting individual brushes.
• Theres brushes are used in both fixed and portable machines (providing that they do not exceed 175 mm. diameter and only have one row).

Ø Exterior(D)	No. of knots	Trim length (A)	Saliente de Púa (S)	Arbor hole Thread (B)	Steel			Stainless steel	Brass	R.P.M..
					0,40mm .016″ EI	0,50mm .020″ EK	0,80mm .032″ EQ	0,50mm .020″ BK	0,40mm .016″ HI
mm / “		mm / “	mm / “	mm / “	CODE	CODE	CODE	CODE	CODE	Recom.	Max.
115 / 4.1/2″	20	12 / 1/2″	20 / 3/4″	22 / 7/8″ M14 W-5/8 MR	18110120EI	18110120EK	18110120EQ	18110120BK	18110120HI	6.000	12.000	10
	22				18110122EI	18110122EK	18110122EQ	18110122BK	18110122HI
125 / 5″	22	12 / 1/2″	25 / 1″		18120122EI	18120122EK	18120122EQ	18120122BK	18120122HI	6.000	12.000
150 / 6″	24	12 / 1/2″	34 / 1.3/8″		18150124EI	18150124EK	18150124EQ	18150124BK	18150124HI	5.000	9.000
	28	12 / 1/2″	34 / 1.3/8″		18150128EI	18150128EK	18150128EQ	18150128BK	18150128HI	5.000	9.000
175 / 7″	28	12 / 1/2″	46 / 1.3/4″		18170128EI	18170128EK	18170128EQ	18170128BK	18170128HI	4.000	8.500
	32	12 / 1/2″	30 / 1.5/32″		18170132EI	18170132EK	18170132EQ	18170132BK	18170132HI
200 / 8″	40	12 / 1/2″	30 / 1.1/8″	*	18200140EI	18200140EK	18200140EQ	18200140BK	18200140HI	3.500	4.500
250 / 10″	40	12 / 1/2″	54 / 2.1/8″		18250140EI	18250140EK	18250140EQ	18250140BK	18250140HI	2.800	4.500
* Diameter 200 mm./8” and 250 mm./10” only available with the following plain holes: 20-22-26-30-36-40-50 mm. – 3/4”-7/8”-1”-1.3/16”-1.3/8”-1.5/8”-2”.

* It is necessary add to the article code, the required arbor hole/thread.
Article code: 18150124EK + Arbor hole/Thread cod: 22 • Order example: 18150124EK22

MULTITHREAD

Multithread nut MR (M-14 / W-5/8)
It allows the use of one brush on machines with different types of spindle.