F-16 Cup with CABLE crimped wire
*It is necessary add to the article code, the required thread.
Article code: 161000CEA + Thread code: M14 Order example: 161000CEAM14
Article code: 161000CEA + Thread code: M14 Order example: 161000CEAM14
| Ø Exterior (D) | Trim legth (S) | Thread arbor hole (B) | Coated steel CABLE CRIMPED 2+2×0,32mm CEA |
RPM |  |
|
|---|---|---|---|---|---|---|
| mm / “ | mm / “ | Recom. | Max. | |||
| 75 / 3” | 22 / 7/8” | 22 7/8” M-14 W-5/8 MR |
160750CEA | 11000 | 13000 | 1 unit |
| 100 / 4” | 30 / 1.3/16” | 161000CEA | 4000 | 8500 | ||
| 125 / 5” | 30 / 1.3/16” | 161250CEA | 3200 | |||
NOTE: Available with the threaded nut M-10 x 1,5 / M-10 x 1,25.
MULTITHREAD
Multithread nut MR (M-14 / W-5/8).
It allows the use of one brush on machines with different types of spindle.
Applications and uses:
- The single wires or mono filaments are replaced by crimped cables made of several wires each one.
These cables are made up of a set of high strength steel wires of 0.22 mm diameter which form a flexible, compact and aggressive unit. - The type of finish and cutting capacity are medium, similar to those produced by monofilament steel wire brushes with a wire diameter of 0.30 mm.