Ask for more information

Brushes for deburring machines

* It is necessary add to the article code, the required arbor hole..
Article code: 152518CG + Arbor hole code: 51CH • Order example: 152518CG51CH
Ø Exterior (D) Rows Width (A) Width(EB) Trim length (S) Coated steel Stainless steel Coated steel
CABLE CRIMPED
2+2×0,32mm
CEA		 RPM
0,20mm
.008″
CE		 0,30mm
.012″
CG		 0,50mm
.020″
CK		 0,20mm
.008″
BE		 0,30mm
.012″
BG		 0,50mm
.020″ BK
mm / “ mm / “ mm / “   CODE CODE CODE CODE CODE CODE CODE
250 /
10”		 18 60 /
2.3/8”		 58 47,5 /
1.7/8”		 152518CE 152518CG 152518CK 152518BE 152518BG 152518BK 162518CEA 3600
250 /
10”		 25 95 /
3.3/8”		 93 47,5 /
1.7/8”		 152525CE 152525CG 152525CK 152525BE 152525BG 152525BK 162525CEA
300 /
12”		 15 60 /
2.3/8”		 55 72,5 /
2.3/4”		 153015CE 153015CG 153015CK 153015BE 153015BG 153015BK 163015CEA
300 /
12”		 24 95 /
3.3/8”		 90 72,5 /
2.3/4”		 153024CE 153024CG 153024CK 153024BE 153024BG 153024BK 163024CEA

Keyway diameter

Ø
(B)		 Keyway CODE
(A) (C)
mm / “ mm / “ mm / “
50,8
2”		 13,2 / 1/2” 7,1 / 9.32” 51CH
52,9
2.3/32”		 13,5 / 1/2” 6,4 / 1/4” 53CH
54,7
2”		 13,6 / 1/2” 5,8 / 1/4” 55CH
80
3.1/8”		 13,5 / 1/2” 7,5 / 9/32” 80CH
82,5
3.1/4”		 13,2 / 1/2” 6,4 / 1/4” 83CH

Plain hole diameter

Ø
(B)		 CODE
mm / “
50 / 2” 50
63 / 2.1/2” 63
100 / 4” 100

Applications and uses:

  • These brushes are used for deburring tube ends and profile and are characterized by its high density.
  • As brush manufacturers we can attend to the most exceptional requirements. Our technical department advises you on the solution to your problems, jointly developing the brush design, with the aim of finding the most favourable and optimal solution.